

GM22 2000-2008 GM Class II Data Bus - Relocation
2000-2008 GM w/Class II Data Bus system - Relocation
GM STEREO/ Radio data Retention and Relocation HarnessUses relays to retain factory door chime -
THIS DOES NOT WORK WITH ONSTAR or BOSE
This Part Is to Keep Chime in Your GM when Installing Aftermarket Stereo
-
Your car is equipped with the GM Class 2 data bus.
-
This system sends and receives data via multiple modules throughout the vehicle including the radio.
-
This system also controls vital functions including the airbag and other functions like the door chimes.
-
The Retention of the factory radio in the vehicle is crucial to the proper function of these system.
-
This Harness will allow the relocation of the factory radio, retention of the door chimes and facilitate the installation of an aftermarket headunit.
-
Follow the directions carefully.
-
You actually are moving ( Relocating) the original stereo to the rear deck / trunk or a storage compartment and installing the new stereo in the dash compartment.
-
This harness will keep all the Safety features: Air Bag, warning chime, etc.
RELOCATION HARNESS - REQUIRES STOCK RADIO TO BE RELOCATED TO TRUNK OR UNDERCAR SEAT. THIS HANRNESS IS NOT A REMOVAL HARNESS IT REQUIRES THE STOCK RADIO TO BE WIRED ALONG WITH THE AFTERMARKET STEREO. (WE RECOMMEND USING THE REMOVAL HARNESS FOR A CLEAN AND QUICK INSTALL)


